J23 Inclinable Mechanical Press

Product Detail

FEATURES:

Adopt rotating key positive clutch, which is easy to operate and convenient to maintain.

J23-25T adopts rolling bearing instead of sliding bearing(copper bearing) and this make the transmission gear more wear-resistant and avoid loud noise of gears caused by copper bearing abrasion.

J23-35 open type inclinable press machine is unique in the industry. Other 35T press machine produced by other manufactures in the country all adopt a machine body of the 25T machine and copper bearing for the transmission gear. We are the only manufacturer that redesigns the body. The 35T machine body is far more heavier than the 25T machine body and the strength is also better with the rolling bearing transmission (low gear noise), which is almost eaqual to the light 40T press machine.

J23-80T and above press machines adopt pneumatic double balance cylinder, which decreased the balance force fluctuate, and balanced the weight of slider and die, prevent the unstable situation. Besides, it also avoid the clash and noise caused by the gear reverse force during transmission; eliminate the clearance between connecting rod and slide; reduce the compact force and abrasion of stress components; and avoid the accident caused by falling slider when brake or connecting rod broke.

Main Specifications:

Parameter		Unit	J23-6.3	J23-10	J23-16	J23-25
Nominal Capacity		KN	63	100	160	250
Nominal Stroke		mm	2	2	2	2.5
Slide Stroke		mm	35	45	55	65
Slide Stroke Per Minute		T/M	170	145	125	55
Maximum Die Set Height		mm	150	180	220	270
Die Height Adjustment		mm	30	35	45	55
Throat Depth		mm	110	130	160	200
Distance Between Uprights		mm	150	180	220	270
Slide Bottom Size	L x R	mm	140	170	200	250
	F x B	mm	120	150	180	220
Stem hole Size	Dia	mm	30	30	40	40
	Depth	mm	55	55	60	60
Bolster Size	L x R	mm	310	370	450	560
	F x B	mm	200	240	300	370
Diameter of Blanking Hole		mm	60	80	100	120
Bolster Thickness		mm	30	35	40	50
Max. Angle of Inclination		°	45	35	35	30
Bolster Surface Height		mm	750	730	750	800
Overall Size	F x B	mm	780	900	1150	1345
	L x R	mm	620	665	847	950
	H	mm	1503	1658	1910	2130
Distance between foundation bolts	F x B	mm	530	610	780	920
	L x R	mm	314	394	450	600
Motor Power		Kw	0.75	1.1	1.5	2.2
Weight		Kg	400	576	1085	1780




Parameter		Unit	J23-35	J23-40	J23-63	JB23-63
Nominal Capacity		KN	350	400	630	630
Nominal Stroke		mm	3.5	6	6	7
Slide Stroke		mm	80	90	110	110
Slide Stroke Per Minute		T/M	50	45	50	40
Maximum Die Set Height		mm	290	320	360	390
Die Height Adjustment		mm	60	65	80	80
Throat Depth		mm	220	250	260	310
Distance Between Uprights		mm	280	340	350	420
Slide Bottom Size	L x R	mm	250	300	300	400
	F x B	mm	220	260	260	360
Stem hole Size	Dia	mm	40	50	50	50
	Depth	mm	60	70	70	70
Bolster Size	L x R	mm	610	700	760	860
	F x B	mm	400	460	480	570
Diameter of Blanking Hole		mm	130	150	180	180
Bolster Thickness		mm	60	65	80	80
Max. Angle of Inclination		°	30	30	20	20
Bolster Surface Height		mm	815	850	810	850
Overall Size	F x B	mm	1460	1721	1810	1958
	L x R	mm	1058	1335	1350	1500
	H	mm	2225	2488	2740	2868
Distance between foundation bolts	F x B	mm	1020	1060	1180	1300
	L x R	mm	650	750	850	920
Motor Power		Kw	4	5.5	5.5	7.5
Weight		Kg	2650	3540	4550	5500




Parameter		Unit	J23-80	J23-100	J23-125
Nominal Capacity		KN	800	1000	1250
Nominal Stroke		mm	7	7	8
Slide Stroke		mm	120	140	150
Slide Stroke Per Minute		T/M	38	38	38
Maximum Die Set Height		mm	440	480	500
Die Height Adjustment		mm	90	100	100
Throat Depth		mm	350	380	390
Distance Between Uprights		mm	450	560	550
Slide Bottom Size	L x R	mm	430	540	540
	F x B	mm	360	480	480
Stem hole Size	Dia	mm	60	60	60
	Depth	mm	75	75	75
Bolster Size	L x R	mm	950	1080	1100
	F x B	mm	650	710	720
Diameter of Blanking Hole		mm	200	220	240
Bolster Thickness		mm	100	120	130
Max. Angle of Inclination		°	20	15	13
Bolster Surface Height		mm	850	850	860
Overall Size	F x B	mm	2060	2404	2504
	L x R	mm	1715	1790	1790
	H	mm	3290	3625	3715
Distance between foundation bolts	F x B	mm	1360	1550	1710
	L x R	mm	1010	1130	1110
Motor Power		Kw	7.5	11	11
Weight		Kg	7390	10800	12035

Work shop: